13 hits   12.80 per million (hits/wds×1,000,000), 14.83/mill in RefCorp for KEYNESS=0.86 in brown_strip.txt [?]

001. Measure straight up from marked row. See illustration. INSERT MARKERS:_ When directions read " sl a marker on needl
002. n combination. The bore is unrifled but is provided with an INSERT tube which is rifled and which, surprisingly, gives p
003. ly 1/4'' tappet movement. Drill a No. 50 hole, tap 2-56 and INSERT a roundhead 2-56 screw as you did on the first end. D
004. t in tappet 3. Place the locking bar in proper position and INSERT tappet 3. Scribe a line through the center of the pin
005. ROM THE OUTSIDE IN- TRY TO BUILD FROM THE INSIDE OUT# Don't INSERT your components into fixed openings, they may or may
006. twisted 1/2'' sq. spacer. As an anchor for the spring lock, INSERT a **f bar in the lower left corner of the frame as sh
007. nderside of the bar. To find the other stop screw position, INSERT the tappet into the frame and hold the screw head tig
008. shoes and socks from the unidentified feet and, as a prank, INSERT rosebuds between the toes. A little later the distric
009. alves on grill, sear cuts and allot extra time. For roasts, INSERT meat thermometer diagonally so it does not rest on bo
010. You can unscrew this tube and replace it with a smoothbore INSERT for use with.22 shotshells- to break the little Targ
011. th a 2-56 nut and screw. Drill two No. 50 holes, one in the INSERT and one in the locking bar spacer directly above it,
012. er can be computed. The first step in using a formula is to INSERT the numerical values of the factors involved in their
013. a finished **f closet. Don't position your studs before you INSERT your windows in conventional construction; that way y